Company News & Casting Industry Insights

What is the Hydraulic System?A hydraulic system is a drive technology where a fluid is used to move the energy from e.g. an electric motor to an actuator, such as a hydraulic cylinder. The fluid is theoretically uncompressible and the fluid path can be flexible in the same way as an electric cable.

Cast irons are a family of iron-carbon alloys. Their high carbon content (usually 2–4%) gives cast iron its characteristic hardness. To facilitate a better understanding of these materials, they can be divided into five groups, based on composition and metallurgical structure: white cast iron, malleable cast iron, grey cast iron, ductile cast iron and alloy cast iron.

H1. 1. Precision casting surface non-destructive sand cleaning equipment is easy to operate with high efficiency.H2. 2. The special shape and hole cavity of the casting has good deoxidization treatment effect, standard nozzle is suitable for small deoxidization, equipped with high pressure on the no

So-called precision casting technology, simply be with fusible materials (such as wax material or plastic) into the meltability model (referred to as "investment pattern or model), on which the coated with several layers of tailor-made refractory coating, after drying and hardening type to form a wh

Heat treatment is to point to metal materials under solid state, by means of heating, heat preservation and cooling, changing the chemical composition of material surface or internal and organization, to obtain the required properties of a metal hot working process. Heat treatment is one of the impo

What are the mechanical properties of steel?The properties of metal materials are generally divided into two categories: process performance and service performance. Process performance refers to the mechanical properties of metal parts in the process of cold and hot processing.

H2. Many places are now using the lost wax casting products as a main material, and the reason of lost wax casting products is so widely used, it is very important, is the lost wax casting manufacturer price affordable, compared to other products of the same type, lost wax casting products are affor

The problem of workpiece deformation in machining is a difficult problem to solve. First, we must analyze the causes of the deformation and then take measures to deal with it. Our common reasons are: shaft parts in turning are easy to produce ellipse or edge circle, taper, bending, especially the pr

H2. As we all know, at ordinary times in the casting, accidentally will produce the die. The formation of scrap not only delays the staff's time, but also wastes the material of the module. But now advocate of saving energy production in China, under the influence of national policy, now many of the

Spheroidal graphite casting is a kind of casting process, and now it is made of rare earth magnesium alloy as spherifying agent, iron furnace and gray iron are the same. In order to ensure good spherification, the content of sulfur and phosphorus should be controlled lower. Considering the loss of t

H2. 1. Holding time.The length of holding time depends on the investment casting material and wall thickness. For castings with high melting point, high crystallization temperature range and thick wall, the holding time is longer. For the casting of small and thin wall of crystallization temperature

The floorboard of the precision casting refers to a process, it refers to the use of sophisticated modelling method for precise casting process, a lot of castings can be got through precision casting, such as: hardware accessories, auto parts, motorcycle accessories and all kinds of valves, etc.,So